Exit Destination (.JMP) File Format - Revision history

Heinermann: file format category

2025-06-23T17:14:36Z

file format category

← Older revision		Revision as of 17:14, 23 June 2025
Line 1:		Line 1:
	{{RE}}		{{File Format}}

	==Explanation==		==Explanation==

Auride: changing level file id link to Map Table

2023-07-30T21:12:34Z

changing level file id link to Map Table

← Older revision		Revision as of 21:12, 30 July 2023
Line 28:		Line 28:
	\| 6 \|\| 2 \|\| uint16 \|\| orient \|\| Ammy's orientation. Could be int16.		\| 6 \|\| 2 \|\| uint16 \|\| orient \|\| Ammy's orientation. Could be int16.
	\|-		\|-
	\| 8 \|\| 1 \|\| uint8 \|\| area_id \|\| Destination area ID. See [[~~Level File ID~~ Table]].		\| 8 \|\| 1 \|\| uint8 \|\| area_id \|\| Destination area ID. See [[Map Table]].
	\|-		\|-
	\| 9 \|\| 1 \|\| uint8 \|\| region_id \|\| Destination region ID. See [[~~Level File ID~~ Table]].		\| 9 \|\| 1 \|\| uint8 \|\| region_id \|\| Destination region ID. See [[Map Table]].
	\|-		\|-
	\| 10 \|\| 1 \|\| uint8 \|\| unknown \|\| Seems to reference the other side of the exit but doesn't do anything when changed?		\| 10 \|\| 1 \|\| uint8 \|\| unknown \|\| Seems to reference the other side of the exit but doesn't do anything when changed?

Whataboutclyde: Creating link to zones format.

2022-11-22T04:34:51Z

Creating link to zones format.

← Older revision		Revision as of 04:34, 22 November 2022
Line 3:		Line 3:
	==Explanation==		==Explanation==

	This file defines the destinations for exits. This does not define the loading zones themselves, but is referred to by them. (See ~~Zone~~ (.MEH/.SCA/.SCI) File Format for that.)		This file defines the destinations for exits. This does not define the loading zones themselves, but is referred to by them. (See [[Zones (.MEH/.SCA/.SCI) File Format]] for that.)

	==File Format==		==File Format==
Line 28:		Line 28:
	\| 6 \|\| 2 \|\| uint16 \|\| orient \|\| Ammy's orientation. Could be int16.		\| 6 \|\| 2 \|\| uint16 \|\| orient \|\| Ammy's orientation. Could be int16.
	\|-		\|-
	\| 8 \|\| 1 \|\| uint8 \|\| area_id \|\| See [[Level File ID Table]].		\| 8 \|\| 1 \|\| uint8 \|\| area_id \|\| Destination area ID. See [[Level File ID Table]].
	\|-		\|-
	\| 9 \|\| 1 \|\| uint8 \|\| region_id \|\| See [[Level File ID Table]].		\| 9 \|\| 1 \|\| uint8 \|\| region_id \|\| Destination region ID. See [[Level File ID Table]].
	\|-		\|-
	\| 10 \|\| 1 \|\| uint8 \|\| unknown \|\| Seems to reference the other side of the exit but doesn't do anything when changed?		\| 10 \|\| 1 \|\| uint8 \|\| unknown \|\| Seems to reference the other side of the exit but doesn't do anything when changed?

Whataboutclyde: /* jumpEntry */ Making it more in line with the new ones I made.

2022-11-22T03:49:37Z

jumpEntry: Making it more in line with the new ones I made.

← Older revision		Revision as of 03:49, 22 November 2022
Line 21:		Line 21:
	Describes a single exit destination.		Describes a single exit destination.

	{\| class="wikitable ~~dataStructure~~"		{\| class="wikitable"
			! Start (Byte) !! Width (Bytes) !! Type !! Field Name !! Note
	\|-		\|-
	~~! Start~~ (~~Bytes in Hex~~) ~~!! Width (Bytes in Hex) !! Type !! Field Description !! Note~~		\| 0 \|\| 6 \|\| PackedTuple<int16> \|\| coordinates \|\| Location on destination map (x, y, z)
	\|-		\|-
	\| 0 \|\| 2 \|\| ~~int16~~ \|\| ~~X Coordinate~~ \|\| ~~At destination~~.		\| 6 \|\| 2 \|\| uint16 \|\| orient \|\| Ammy's orientation. Could be int16.
	\|-		\|-
	\| 2 \|\| 2 \|\| ~~int16~~ \|\| ~~Y Coordinate~~ \|\| ~~At destination~~.		\| 8 \|\| 1 \|\| uint8 \|\| area_id \|\| See [[Level File ID Table]].
	\|-		\|-
	\| 4 \|\| 2 \|\| ~~int16~~ \|\| ~~Z Coordinate~~ \|\| ~~At destination~~.		\| 9 \|\| 1 \|\| uint8 \|\| region_id \|\| See [[Level File ID Table]].
	\|-		\|-
	\| 6 \|\| 2 \|\| ~~uint16~~ \|\| ~~Ammy Orientation~~ \|\| ~~Could be int16. Which way she faces at destination.~~		\| 10 \|\| 1 \|\| uint8 \|\| unknown \|\| Seems to reference the other side of the exit but doesn't do anything when changed?
	\|-		\|-
	~~\| 8 \|\| 1 \|\| uint8 \|\| Area ID \|\| See [[Level File ID Table.]]~~		\| 11 \|\| 1 \|\| uint8 \|\| exit_id \|\| Index into this file.
	\|-
	~~\| 9 \|\| 1 \|\| uint8 \|\| Region ID \|\| See [[Level File ID Table.]]~~
	\|-
	~~\| 10 \|\| 1 \|\| uint8 \|\| Source ID? \|\| Seems to reference the other side of the exit, but doesn't appear to do anything when changed.~~
	\|-
	\| 11 \|\| 1 \|\| uint8 \|\| ~~Exit ID~~ \|\| Index into this file.
	\|}		\|}

Whataboutclyde at 19:54, 26 November 2021

2021-11-26T19:54:03Z

← Older revision		Revision as of 19:54, 26 November 2021
Line 13:		Line 13:
	\| 0 \|\| 4 \|\| uint32 \|\| Number of entries \|\| Count of exit destination definition.		\| 0 \|\| 4 \|\| uint32 \|\| Number of entries \|\| Count of exit destination definition.
	\|-		\|-
	\| 4 \|\| 12 each \|\| [[#jumpEntry]] array \|\| [[#jumpEntry]] \|\| One for each exit definition.		\| 4 \|\| 12 each \|\| [[#jumpEntry\|jumpEntry]] array \|\| [[#jumpEntry\|jumpEntry]] \|\| One for each exit definition.
	\|-		\|-
	\| \|\| \|\| \|\| padding \|\| Pad with zeroes for 64 byte alignment		\| \|\| \|\| \|\| padding \|\| Pad with zeroes for 64 byte alignment

Whataboutclyde at 19:53, 26 November 2021

2021-11-26T19:53:33Z

← Older revision		Revision as of 19:53, 26 November 2021
Line 11:		Line 11:
	! Start (Bytes in Hex) !! Width (Bytes in Hex) !! Type !! Field Name !! Note		! Start (Bytes in Hex) !! Width (Bytes in Hex) !! Type !! Field Name !! Note
	\|-		\|-
	\| 0 \|\| 4 \|\| uint32 \|\| ~~number_of_entries~~ \|\| ~~One for each~~ exit destination definition.		\| 0 \|\| 4 \|\| uint32 \|\| Number of entries \|\| Count of exit destination definition.
	\|-		\|-
	\| 4 \|\| 12 each \|\| jumpEntry array \|\| ~~jumpEntries~~ \|\|		\| 4 \|\| 12 each \|\| [[#jumpEntry]] array \|\| [[#jumpEntry]] \|\| One for each exit definition.
	\|-		\|-
	\| \|\| \|\| \|\| padding \|\| Pad with zeroes for 64 ~~bit~~ alignment		\| \|\| \|\| \|\| padding \|\| Pad with zeroes for 64 byte alignment
	\|}		\|}

	===jumpEntry===		===jumpEntry===
			Describes a single exit destination.

	{\| class="wikitable dataStructure"		{\| class="wikitable dataStructure"
	\|-		\|-
	! Start (Bytes in Hex) !! Width (Bytes in Hex) !! Type !! Field ~~Name~~ !! Note		! Start (Bytes in Hex) !! Width (Bytes in Hex) !! Type !! Field Description !! Note
	\|-		\|-
	\| 0 \|\| 2 \|\| ~~uint16~~ \|\| ~~x_coordinate~~ \|\|		\| 0 \|\| 2 \|\| int16 \|\| X Coordinate \|\| At destination.
	\|-		\|-
	\| 2 \|\| 2 \|\| ~~uint16~~ \|\| ~~7_coordinate~~ \|\|		\| 2 \|\| 2 \|\| int16 \|\| Y Coordinate \|\| At destination.
	\|-		\|-
	\| 4 \|\| 2 \|\| ~~uint16~~ \|\| ~~z_coordinate~~ \|\|		\| 4 \|\| 2 \|\| int16 \|\| Z Coordinate \|\| At destination.
	\|-		\|-
	\| 6 \|\| 2 \|\| uint16 \|\| ~~ammy_orientation~~ \|\|		\| 6 \|\| 2 \|\| uint16 \|\| Ammy Orientation \|\| Could be int16. Which way she faces at destination.
	\|-		\|-
	\| 8 \|\| 1 \|\| uint8 \|\| ~~area_id~~ \|\| See Level File ID Table.		\| 8 \|\| 1 \|\| uint8 \|\| Area ID \|\| See [[Level File ID Table.]]
	\|-		\|-
	\| 9 \|\| 1 \|\| uint8 \|\| ~~region_id~~ \|\| See Level File ID Table.		\| 9 \|\| 1 \|\| uint8 \|\| Region ID \|\| See [[Level File ID Table.]]
	\|-		\|-
	\| 10 \|\| 1 \|\| uint8 \|\| ~~source_id~~? \|\| Seems to reference the other side of the exit, but doesn't appear to do anything when changed.		\| 10 \|\| 1 \|\| uint8 \|\| Source ID? \|\| Seems to reference the other side of the exit, but doesn't appear to do anything when changed.
	\|-		\|-
	\| 11 \|\| 1 \|\| uint8 \|\| ~~exit_id~~ \|\| Index into this file.		\| 11 \|\| 1 \|\| uint8 \|\| Exit ID \|\| Index into this file.
	\|}		\|}

Auride: /* File Format */ adding padding to overall

2021-11-26T03:32:12Z

File Format: adding padding to overall

← Older revision		Revision as of 03:32, 26 November 2021
Line 13:		Line 13:
	\| 0 \|\| 4 \|\| uint32 \|\| number_of_entries \|\| One for each exit destination definition.		\| 0 \|\| 4 \|\| uint32 \|\| number_of_entries \|\| One for each exit destination definition.
	\|-		\|-
	\| 4 \|\| 64 each \|\| jumpEntry array \|\| jumpEntries \|\|		\| 4 \|\| 12 each \|\| jumpEntry array \|\| jumpEntries \|\|
			\|-
			\| \|\| \|\| \|\| padding \|\| Pad with zeroes for 64 bit alignment
	\|}		\|}

Auride: /* jumpEntry */ Padding is part of overall

2021-11-26T03:29:53Z

jumpEntry: Padding is part of overall

← Older revision		Revision as of 03:29, 26 November 2021
Line 36:		Line 36:
	\|-		\|-
	\| 11 \|\| 1 \|\| uint8 \|\| exit_id \|\| Index into this file.		\| 11 \|\| 1 \|\| uint8 \|\| exit_id \|\| Index into this file.
	\|-
	~~\| 12 \|\| 52 \|\| \|\| \|\| Pad with zeroes for 64 byte alignment.~~
	\|}		\|}

Auride: /* File Format */ Converting to tables

2021-11-25T16:23:58Z

File Format: Converting to tables

← Older revision		Revision as of 16:23, 25 November 2021
Line 6:		Line 6:

	==File Format==		==File Format==
	~~<pre>~~		===Overall===
	~~uint32_t~~ number_of_entries // One for each exit destination definition.		{\| class="wikitable dataStructure"
			\|-
			! Start (Bytes in Hex) !! Width (Bytes in Hex) !! Type !! Field Name !! Note
			\|-
			\| 0 \|\| 4 \|\| uint32 \|\| number_of_entries \|\| One for each exit destination definition.
			\|-
			\| 4 \|\| 64 each \|\| jumpEntry array \|\| jumpEntries \|\|
			\|}

	~~For each entry:~~		===jumpEntry===
	uint16 x_coordinate		{\| class="wikitable dataStructure"
	uint16 ~~y_coordinate~~		\|-
	uint16 z_coordinate		! Start (Bytes in Hex) !! Width (Bytes in Hex) !! Type !! Field Name !! Note
	uint16 ammy_orientation		\|-
	uint8 area_id // See Level File ID Table.		\| 0 \|\| 2 \|\| uint16 \|\| x_coordinate \|\|
	uint8 region_id // See Level File ID Table.		\|-
	uint8 ~~unknown //~~ Seems to reference the other side of the exit, but doesn't appear to do anything when changed.		\| 2 \|\| 2 \|\| uint16 \|\| 7_coordinate \|\|
	uint8 exit_id // Index into this file.		\|-
			\| 4 \|\| 2 \|\| uint16 \|\| z_coordinate \|\|
	Pad with zeroes for 64 byte alignment.		\|-
	~~</pre>~~		\| 6 \|\| 2 \|\| uint16 \|\| ammy_orientation \|\|
			\|-
			\| 8 \|\| 1 \|\| uint8 \|\| area_id \|\| See Level File ID Table.
			\|-
			\| 9 \|\| 1 \|\| uint8 \|\| region_id \|\| See Level File ID Table.
			\|-
			\| 10 \|\| 1 \|\| uint8 \|\| source_id? \|\| Seems to reference the other side of the exit, but doesn't appear to do anything when changed.
			\|-
			\| 11 \|\| 1 \|\| uint8 \|\| exit_id \|\| Index into this file.
			\|-
			\| 12 \|\| 52 \|\| \|\| \|\| Pad with zeroes for 64 byte alignment.
			\|}

Whataboutclyde at 16:09, 25 November 2021

2021-11-25T16:09:45Z

← Older revision		Revision as of 16:09, 25 November 2021
Line 3:		Line 3:
	==Explanation==		==Explanation==

	This file defines the destinations for exits. This does not define the ~~exit definitions~~ themselves, but is referred to by them. (See Zone (.MEH/.SCA/.SCI) File Format for that.)		This file defines the destinations for exits. This does not define the loading zones themselves, but is referred to by them. (See Zone (.MEH/.SCA/.SCI) File Format for that.)

	==File Format==		==File Format==