Motion (.MOT) File Format

Note: This page pertains to Reverse Engineering of Okami File Formats.

Explanation

This file incorporates curves and/or properties for an given embbed model. Because of that, it's almost always certain that they are contained in a file container (dat). There's instances of mots that controlled properties instead of bones, so it's not always certain of what it animates. A further inspection have to be done. But since it animates bones most of the times, i will threat it as curves that animates bones.

Every curve is computed using the Cubic Hermite interpolation formula. That means every curve is treated as a Hermite Curve.

Note: This formula's image was taken from the Cubic Hermite spline Wiki.

Mot main header (8 bytes length)

Offset	Type	Size	Description
0x00	uint32_t	4	File identifier (Magic number).
0x04	uint16_t	2	Animation's frame count.
0x06	uint8_t	1	Animation's curve count.
0x07	uint8_t	1	Loop flag, sets if the animation either loops or not (1/0).

On offset 8, The File gives informations about the curves, i.e: what bone it animates, etc.

Curve Info (8 bytes length)

Offset	Type	Size	Description
0x00	int8_t	1	Bone index (-1 means it animates the mode's root bone).
0x01	int8_t	1	Curve properties (See below).
0x02	uint16_t	2	Curve keyframe count.
0x04	uint32_t / float32_t	4	Keyframes offset / value

the 4th offset of each curve info can be either a float, or uint32. it's only set as a float if the Property Family of the curve is a Single Pose. Otherwise, it's a offset. The curve property will define what property of the bone/object it is animating. There's some properties who could not be determined yet. See some already identified values bellow.

Curve Properties (Already identified)

Value	Property Family	Property
0	Single Pose	Position X
1	Single Pose	Position Y
2	Single Pose	Position Z
3	Single Pose	Rotation X
4	Single Pose	Rotation Y
5	Single Pose	Rotation Z
6	Single Pose	Scale X
7	Single Pose	Scale Y
8	Single Pose	Scale Z
16	Quantized Curve	Position X
17	Quantized Curve	Position Y
18	Quantized Curve	Position Z
19	Quantized Curve	Rotation X
20	Quantized Curve	Rotation Y
21	Quantized Curve	Rotation Z
22	Quantized Curve	Scale X
23	Quantized Curve	Scale Y
24	Quantized Curve	Scale Z
50	Quantized-Precision Curve	Position X
51	Quantized-Precision Curve	Position Y
52	Quantized-Precision Curve	Position Z
53	Quantized-Precision Curve	Rotation X
54	Quantized-Precision Curve	Rotation Y
55	Quantized-Precision Curve	Rotation Z
56	Quantized-Precision Curve	Scale X
57	Quantized-Precision Curve	Scale Y
58	Quantized-Precision Curve	Scale Z
80	Full-Precision Curve	Position X
81	Full-Precision Curve	Position Y
82	Full-Precision Curve	Position Z
83	Full-Precision Curve	Rotation X
84	Full-Precision Curve	Rotation Y
85	Full-Precision Curve	Rotation Z
86	Full-Precision Curve	Scale X
87	Full-Precision Curve	Scale Y
88	Full-Precision Curve	Scale Z

The Property Family tells the game how the keyframes are handled ingame. Depending on the Family the property is set in, curves will be readen diferently.

Single Pose

This Property Family is the cheapest to compute. Because since it's a single pose, The there's only one keyframe, in which is given on the Curve Info.

(Example):

Offset	Value	Description
0x00	-1	This field is telling that the curve is animating the root bone of the model.
0x01	5	This field is telling that the curve animates the Z rotation of the root bone, being set on a Single-Pose Property Family.
0x02	1	This field is telling that there's only one keyframe on this curve, which makes sense, since this curve is set on a Single-Pose Property Family.
0x04	0.52	This field is telling the value or the Z rotation right away, no more computing needed.

Quantized Curve

This Property Family Is known for having Quantized values. It's the most eficient type of curve, regarding storage size.

(Example):

Offset	Value	Description
0x00	0	This field is telling that the curve is animating the bone index 0 of the model.
0x01	16	This field is telling that the curve animates the X Position of the root bone, being set on a Quantized Curve Property Family.
0x02	4	This field is telling that there's 4 keyframes on this curve.
0x04	512	This field is telling in which offset of the file the keyframe infos are located.

Quantized Curve Keyframe Header (12 bytes length)

Only Quantized property families contain a keyframe Header. That's because Every keyframe is dependent on the values given on the Header.

Offset	Type	Size	Description
0x00	float16_t	2	Minimum value of a keyframe.
0x02	float16_t	2	Maximum value of a keyframe.
0x04	float16_t	2	Minimum value of the start tangent (m0)
0x06	float16_t	2	Maximum value of the start tangent (m0)
0x08	float16_t	2	Minimum value of the end tangent (m1)
0x0A	float16_t	2	Maximum value of the end tangent (m1)

This is the only Property Family that uses the float16_t type. That's a special type of float that can be represented as two bytes. Especifically, this type of float is built with a 1 bit sign, 6 bit exponent, a 9 bit significand and a bias of 47. The bias favours smaller numbers. That means, the highest the number, the less precise it is. That's to compensate the small amount of data two bytes can pack.

After that, the keyframes are given.

Quantized Keyframes (4 bytes length)

Offset	Type	Size	Description
0x00	uint8_t	1	Keyframe time (Relative to the time of the last keyframe).
0x01	uint8_t	1	Delta value of the Keyframe.
0x02	uint8_t	1	Delta value of the keyframe's start tangent. (m0)
0x03	uint8_t	1	Delta value of the keyframe's end tangent. (m1)

The keyframe deltas are calculated as following: X = Y + Z * W Where X is the output value, Y is the minimum value, Z is the maximum value, and W is the delta value. Essentially, the formula is telling that the output value is blending from the minimum to the maximum value, based on the value of Delta.

So, that would leave us with...

• P_value = minimum_value + maximum_value * delta_value
• M0_value = minimum_m0 + maximum_m0 * delta_m0
• M1_value = minimum_m1 + maximum_m1 * delta_m1

After computing the full values, The curve is to be computed using the Hermite Cubic Interpolation.

Quantized-Precision Curve

For this Property Family, the process is almost the exact same. However, there are some changes. First of, This is a more precise version of the Quantized curves. Therefore, the values are doubled up.

(Example):

Offset	Value	Description
0x00	0	This field is telling that the curve is animating the bone index 0 of the model.
0x01	50	This field is telling that the curve animates the X Position of the root bone, being set on a Quantized-Precision Curve Property Family.
0x02	4	This field is telling that there's 4 keyframes on this curve.
0x04	512	This field is telling in which offset of the file the keyframe infos are located.

(Keyframes header):

Offset	Type	Size	Description
0x00	float32_t	4	Minimum value of a keyframe.
0x02	float32_t	4	Maximum value of a keyframe.
0x04	float32_t	4	Minimum value of the start tangent (m0)
0x06	float32_t	4	Maximum value of the start tangent (m0)
0x08	float32_t	4	Minimum value of the end tangent (m1)
0x0A	float32_t	4	Maximum value of the end tangent (m1)

You can notice that, since the values were doubled up, The use of the custom float16_t were completely removed, since now the file can use float32's instead, which are more precise and stable in comparision. This results on the size of the keyframe header to be extended to 24 bytes each.

(Keyframe):

Offset	Type	Size	Description
0x00	uint16_t	2	Keyframe time (Absolute).
0x02	uint16_t	2	Delta value of the Keyframe.
0x04	uint16_t	2	Delta value of the keyframe's start tangent. (m0)
0x06	uint16_t	2	Delta value of the keyframe's end tangent. (m1)

Aside from the keyframe time being Aboslute, the rest of the process remains the exact same.

Full-Precision Curve

This is the most straightforward Property Family. However, the most expensive (in storaging terms). Different from the Quantized types, this however is not dependent of a Keyframe Header. Instead, it tells the values right away, Rendering this Property Family the easiest to compute (considering this is not a single pose), but the most expensive to store in storage terms.