View source for Exit Destination (.JMP) File Format

{{RE}}

==Explanation==

This file defines the destinations for exits. This does not define the loading zones themselves, but is referred to by them. (See [[Zones (.MEH/.SCA/.SCI) File Format]] for that.)

==File Format==
===Overall===
{| class="wikitable dataStructure"
|-
! Start (Bytes in Hex) !! Width (Bytes in Hex) !! Type !! Field Name !! Note
|-
| 0 || 4 || uint32 || Number of entries || Count of exit destination definition.
|-
| 4 || 12 each || [[#jumpEntry|jumpEntry]] array || [[#jumpEntry|jumpEntry]] || One for each exit definition.
|-
| || || || padding || Pad with zeroes for 64 byte alignment
|}

===jumpEntry===
Describes a single exit destination.

{| class="wikitable"
! Start (Byte) !! Width (Bytes) !! Type !! Field Name !! Note
|-
| 0 || 6 || PackedTuple<int16> || coordinates || Location on destination map (x, y, z)
|-
| 6 || 2 || uint16 || orient || Ammy's orientation. Could be int16.
|-
| 8 || 1 || uint8 || area_id || Destination area ID. See [[Level File ID Table]].
|-
| 9 || 1 || uint8 || region_id || Destination region ID. See [[Level File ID Table]].
|-
| 10 || 1 || uint8 || unknown || Seems to reference the other side of the exit but doesn't do anything when changed?
|-
| 11 || 1 || uint8 || exit_id || Index into this file.
|}