Exit Destination (.JMP) File Format

From Ōkami Speedrun Wiki
Revision as of 16:08, 25 November 2021 by Whataboutclyde (talk | contribs) (Created page with "{{RE}} ==Explanation== This file defines the destinations for exits. This does not define the exit definitions themselves, but is referred to by them. (See Zone (.MEH/.SCA/....")
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to navigation Jump to search

Note: This page pertains to Reverse Engineering of Okami.

Explanation

This file defines the destinations for exits. This does not define the exit definitions themselves, but is referred to by them. (See Zone (.MEH/.SCA/.SCI) File Format for that.)

File Format

uint32_t number_of_entries     // One for each exit destination definition.

For each entry:
    uint16 x_coordinate
    uint16 y_coordinate
    uint16 z_coordinate
    uint16 ammy_orientation
    uint8  area_id             // See Level File ID Table.
    uint8  region_id           // See Level File ID Table.
    uint8  unknown             // Seems to reference the other side of the exit, but doesn't appear to do anything when changed.
    uint8  exit_id             // Index into this file.

Pad with zeroes for 64 byte alignment.
Retrieved from "https://okami.speedruns.wiki/index.php?title=Exit_Destination_(.JMP)_File_Format&oldid=1147"