Exit Destination (.JMP) File Format
Revision as of 19:53, 26 November 2021 by Whataboutclyde (talk | contribs)
Note: This page pertains to Reverse Engineering of Okami.
Explanation
This file defines the destinations for exits. This does not define the loading zones themselves, but is referred to by them. (See Zone (.MEH/.SCA/.SCI) File Format for that.)
File Format
Overall
| Start (Bytes in Hex) | Width (Bytes in Hex) | Type | Field Name | Note |
|---|---|---|---|---|
| 0 | 4 | uint32 | Number of entries | Count of exit destination definition. |
| 4 | 12 each | #jumpEntry array | #jumpEntry | One for each exit definition. |
| padding | Pad with zeroes for 64 byte alignment |
jumpEntry
Describes a single exit destination.
| Start (Bytes in Hex) | Width (Bytes in Hex) | Type | Field Description | Note |
|---|---|---|---|---|
| 0 | 2 | int16 | X Coordinate | At destination. |
| 2 | 2 | int16 | Y Coordinate | At destination. |
| 4 | 2 | int16 | Z Coordinate | At destination. |
| 6 | 2 | uint16 | Ammy Orientation | Could be int16. Which way she faces at destination. |
| 8 | 1 | uint8 | Area ID | See Level File ID Table. |
| 9 | 1 | uint8 | Region ID | See Level File ID Table. |
| 10 | 1 | uint8 | Source ID? | Seems to reference the other side of the exit, but doesn't appear to do anything when changed. |
| 11 | 1 | uint8 | Exit ID | Index into this file. |