Difference between revisions of "Exit Destination (.JMP) File Format"
Jump to navigation
Jump to search
(→File Format: Converting to tables) |
(→jumpEntry: Padding is part of overall) |
||
| Line 36: | Line 36: | ||
|- | |- | ||
| 11 || 1 || uint8 || exit_id || Index into this file. | | 11 || 1 || uint8 || exit_id || Index into this file. | ||
|} | |} | ||
Revision as of 03:29, 26 November 2021
Note: This page pertains to Reverse Engineering of Okami.
Explanation
This file defines the destinations for exits. This does not define the loading zones themselves, but is referred to by them. (See Zone (.MEH/.SCA/.SCI) File Format for that.)
File Format
Overall
| Start (Bytes in Hex) | Width (Bytes in Hex) | Type | Field Name | Note |
|---|---|---|---|---|
| 0 | 4 | uint32 | number_of_entries | One for each exit destination definition. |
| 4 | 64 each | jumpEntry array | jumpEntries |
jumpEntry
| Start (Bytes in Hex) | Width (Bytes in Hex) | Type | Field Name | Note |
|---|---|---|---|---|
| 0 | 2 | uint16 | x_coordinate | |
| 2 | 2 | uint16 | 7_coordinate | |
| 4 | 2 | uint16 | z_coordinate | |
| 6 | 2 | uint16 | ammy_orientation | |
| 8 | 1 | uint8 | area_id | See Level File ID Table. |
| 9 | 1 | uint8 | region_id | See Level File ID Table. |
| 10 | 1 | uint8 | source_id? | Seems to reference the other side of the exit, but doesn't appear to do anything when changed. |
| 11 | 1 | uint8 | exit_id | Index into this file. |