Difference between revisions of "Exit Destination (.JMP) File Format"
Jump to navigation
Jump to search
(→jumpEntry: Making it more in line with the new ones I made.) |
(changing level file id link to Map Table) |
||
| (One intermediate revision by one other user not shown) | |||
| Line 3: | Line 3: | ||
==Explanation== | ==Explanation== | ||
This file defines the destinations for exits. This does not define the loading zones themselves, but is referred to by them. (See | This file defines the destinations for exits. This does not define the loading zones themselves, but is referred to by them. (See [[Zones (.MEH/.SCA/.SCI) File Format]] for that.) | ||
==File Format== | ==File Format== | ||
| Line 28: | Line 28: | ||
| 6 || 2 || uint16 || orient || Ammy's orientation. Could be int16. | | 6 || 2 || uint16 || orient || Ammy's orientation. Could be int16. | ||
|- | |- | ||
| 8 || 1 || uint8 || area_id || See [[ | | 8 || 1 || uint8 || area_id || Destination area ID. See [[Map Table]]. | ||
|- | |- | ||
| 9 || 1 || uint8 || region_id || See [[ | | 9 || 1 || uint8 || region_id || Destination region ID. See [[Map Table]]. | ||
|- | |- | ||
| 10 || 1 || uint8 || unknown || Seems to reference the other side of the exit but doesn't do anything when changed? | | 10 || 1 || uint8 || unknown || Seems to reference the other side of the exit but doesn't do anything when changed? | ||
Latest revision as of 21:12, 30 July 2023
Note: This page pertains to Reverse Engineering of Okami.
Explanation
This file defines the destinations for exits. This does not define the loading zones themselves, but is referred to by them. (See Zones (.MEH/.SCA/.SCI) File Format for that.)
File Format
Overall
| Start (Bytes in Hex) | Width (Bytes in Hex) | Type | Field Name | Note |
|---|---|---|---|---|
| 0 | 4 | uint32 | Number of entries | Count of exit destination definition. |
| 4 | 12 each | jumpEntry array | jumpEntry | One for each exit definition. |
| padding | Pad with zeroes for 64 byte alignment |
jumpEntry
Describes a single exit destination.
| Start (Byte) | Width (Bytes) | Type | Field Name | Note |
|---|---|---|---|---|
| 0 | 6 | PackedTuple<int16> | coordinates | Location on destination map (x, y, z) |
| 6 | 2 | uint16 | orient | Ammy's orientation. Could be int16. |
| 8 | 1 | uint8 | area_id | Destination area ID. See Map Table. |
| 9 | 1 | uint8 | region_id | Destination region ID. See Map Table. |
| 10 | 1 | uint8 | unknown | Seems to reference the other side of the exit but doesn't do anything when changed? |
| 11 | 1 | uint8 | exit_id | Index into this file. |